Seiwa European Leather Stitching Chisel Leathercraft Pricking Iron Tool 4x4mm
This pricking iron will make holes 4mm (or 7.5 holes per inch) apart when measured from the edge of one hole to the same edge of the next hole, number II on the picture. Each flat hole measures 2mm in length.
Available in sizes where the holes are 4mm, 4.5mm and 5mm apart and come in 1 prong, 2 prong, 4 prong or 6 prong types, each making 2mm long flat holes. Collect them all for the ultimate in stitching versatility in almost any thickness of leather!
Simply place over the leather you wish to sew and hammer, punching holes all the way through your leather. No need for an awl, just punch and sew.
Please note the prongs are designed to snap, rather than bend, to give ultimate hardness and prevent undetected bent prongs from ruining your leatherwork. Therefore, always use a soft headed hammer or mallet (never metal) and tap it into your leather work gently. When removing the prongs from your leather always pull it out of your leatherwork straight, never shift it side to side to loosen it or this could snap the prongs. It is recommended to lubricate your prongs with wax from time to time to allow for easier removal.
Write an online review and share your thoughts with other shoppers!